Information on Lead Removal for residential and commercial buildings
Lead-Safe Renovation Tips
Parents
Renovation & Remodeling
Homeowners
Lead
dust is the #1 cause of lead poisoning, not paint chips. All it takes
is as much dust as can be found in the packet of sugar you put in your
coffee. If your home was built before 1978, you may create lead dust by
disturbing subsurface layers of lead paint during home improvement
projects.
What is the Keep It Clean Campaign?
The
disturbance of lead paint that occurs during home improvement and
painting poses a serious threat to the health of adults and children.
Many homeowners undertaking painting and home improvement projects are
unaware that when they break painted surfaces tiny lead particles can
be released - too small even to see.
The
Keep It Clean Campaign aims to help New Englanders understand the
simple measures they can take to avoid lead poisoning during home
improvement projects. The educational messages of the campaign focus on
easy steps that can make home projects lead-safe:
Contain the area.
Minimize the creation of dust. By working wet and using less hazardous methods, less dust is created.
Do a thorough clean-up at the end of the job. Use wet cleaning like
mops and cloths, along with a HEPA vacuum if available, to collect lead
dust and paint chips.
Test for dust. Use a dust
sampling kit or have a certified worker take dust samples after the
renovation work is done. This will let you know that any lead dust that
may have been released throughout the work has been sufficiently
cleaned up and won't pose a health risk for your family.
As
part of the campaign, New England Lead Coordinating Committee (NELCC)
members form partnerships with hardware stores all over New England.
The store employees are trained on lead-safe renovation techniques and
how to help customers with questions on lead safety. Stores also
receive free brochures, posters and carpenter pencils to hand out to
their customers. By helping customers as they prepare to begin their
job, they will be aware of the need for lead safety. Customers can then
in turn use the lead safe techniques on their jobs to protect
themselves and their families from lead poisoning.
Where Lead is Likely to be a Hazard
Lead
can be found in paint on homes that were built before 1978. The
Consumer Products Safety Commission banned the use of lead-based paint
after that year. If your home was built before 1960, then it probably
has even more lead paint. Peeling, chipping, chalking or cracking
lead-based paint is a hazard and needs immediate attention. Lead-based
paint may also be a hazard when found on surfaces that children can
chew or that gets a lot of wear-and-tear. Constant friction or rubbing
of surfaces can cause paint to deteriorate. These areas include:
Windows and window sills
Doors and door frames
Stairs, railings and banisters
Porches and fences
Exterior of a house (due to harsh weather)
Potentially Hazardous Renovation Activities
Dry scraping or dry sanding
Sandblasting
Using an open flame or torch to burn off paint
Power sanding or grinding (unless shrouded tool with HEPA vacuum attachment is used)
Using methylene chloride - it's toxic
Cutting into drywall
Replacing windows
Who is at risk for lead poisoning?
Children
AND adults are at risk from lead poisoning. Lead is especially
dangerous to children or pregnant women. During home improvement
projects, do-it-yourselfers or contractors disturb lead-based paint on
older homes. This work creates lead paint dust, chips or fumes that
children and adults can easily ingest or inhale. This in turn can
easily result in lead poisoning.
How does lead affect the body?
Lead
has been shown to cause damage to the brain, blood-forming system and
the kidneys. Lead may also cause fatigue, the inability to concentrate,
abdominal pain, irritability and memory loss. Children with high levels
of lead can suffer from damage to the brain and nervous system,
behavior and learning problems (such as hyperactivity), slowed growth,
hearing problems and headaches. Lead is also harmful for adults. Adults
can suffer from difficulties during pregnancy, reproductive problems,
high blood pressure, digestive problems, nerve disorders, memory and
concentration problems and muscle and joint pain.
LEAD-SAFE RENOVATION TIPS
Lead
dust is the #1 cause of lead poisoning, not paint chips. All it takes
is as much dust as can be found in the packet of sugar you put in your
coffee. If your home was built before 1978, you may create lead dust by
disturbing subsurface layers of lead paint during home improvement
projects.
Subsurface layers of lead-based paint can
be disturbed during renovations, even from modest activities such as
sanding walls or putting in new windows. The fine lead dust - often
invisible - can be extremely hazardous to the health of everyone
exposed: children, pregnant woman and the workers themselves. While
most people think paint chips are the sole culprit, paint dust is even
more dangerous. It's easy to inhale and can land on carpeting,
furniture, eating surfaces, and children's toys. Luckily, it's simple
and easy to incorporate lead safety into painting and remodeling
projects. Some simple methods, such as misting surfaces before sanding,
containing the area and careful clean-up, can make a dramatic
difference in reducing the risk of lead poisoning.
If
you are worried about the presence of lead in your home and are hiring
a contractor to do the work for you, ask if they are certified as a
lead-safe or lead-smart renovator. Your state Childhood Lead Poisoning
Prevention Program can provide you with a list of certified renovators.
Here are some simple lead safe renovation tips to follow when you work on your home:
The Fuss About Dust. Choose work methods that create the least amount of dust.
Wet surfaces by misting, then hand sand or scrape
Use chemical strippers (but not those containing methylene chloride)
Use heat guns at a low-medium setting. (but don't use it temperatures above 700°F)
Consider buying or renting a HEPA (high efficiency particulate air
filter) vacuum which can be used safely where there is lead dust
Play It Safe. Always follow these safety guidelines as you work.
Keep children and pregnant women out of the work area
Work on one room at a time
Remove as much furniture as you can from the room
Cover remaining furniture with 6 mil plastic securely taped in place
Close off the work area by taping 6 mil plastic over all doors, windows, the floor, ground, and other exposed surfaces
Turn off forced-air heating and air conditioning systems and cover vents with 6 mil plastic securely taped in place
Allow only workers to enter the area until the job is complete. Be careful not to track dust out of the work area
Don't eat, drink, or smoke while in the work area
Use a plant mister to wet the work surface before hand scraping and sanding
Mist drop cloths/plastic sheets before folding in or rolling up. Misting will suppress dust
If others do the work, ensure that they follow these work practices to protect your family's health and safety
The Right Stuff. Using the proper equipment will help you complete your job safely.
Protective equipment (such as safety glasses, disposable gloves, hat,
shoe covers, protective clothing and NIOSH approved respirator for lead
dust.)
6 mil plastic drop cloths
Duct tape
Mops and buckets (two)
All purpose cleaner or cleaner made just for lead clean-up
Spray bottles/plant misters
Disposable rags or paper towels
Heavy duty plastic bags
HEPA vacuum (to locate a HEPA vacuum call participating agencies on the
back of this pamphlet or refer to the yellow pages of the telephone
book under "Safety Equipment and Clothing" or "Asbestos Removal
Equipment & Supplies")
Leave the Scene Clean. Always clean up carefully at the end of each workday.
Change work clothes and shoes before leaving the work site
Wash hands and face immediately after leaving work area
Shower and wash hair as soon as possible after work/clean-up is completed
Wash work clothes separately from other laundry items
At Final Clean-up:
Mist all dust and chips and place in double plastic garbage bags
Mist drop cloths and carefully roll or fold inward (to keep the dust
from flying around) and discard in double plastic garbage bags
Use two buckets, one with detergent and one with clean rinse water
In addition to the two bucket method use a HEPA vacuum, if available -
If a HEPA vacuum is not available the two bucket method, if done
carefully, should be sufficient
Wash floors, walls, window components, etc. with an all purpose cleaner and disposable or paper towels then rinse well
Change rinse water often
Dispose of towels in plastic bags
Never burn leaded debris or debris that contains paint chips or lead dust
Take It Off Slowly. NEVER use these dangerous paint removal method.
Don't dry scrape or dry sand (except near electrical outlets and switches)
Don't sandblast
Don't use an open flame or torch to burn off paint
Don't power sand or grind (unless shrouded tool with HEPA vacuum attachment is used)
Don't use methylene chloride - it's toxic
Don't use heat guns which operate over 700° F
Get the Lead out - Make sure to test for lead when your job is finished
Take dust samples to determine whether the final clean-up has been thorough.
Before taking a sample, contact the testing laboratory to get specific materials, instructions and paperwork.
Additionally, lead dust test kits are available in many hardware and paint stores
If you are an apartment owner or an independent contractor you may want to have an outside third party collect dust samples
Dust Sampling
It
is recommended that three samples (the floor, a window sill and a
window well) be taken in each room where work has been done.
For the floor:
Measure a 12" by 12" square (you may want to outline it with masking tape)
Place unpowdered disposable gloves on hands.
Take a moist baby wipe or towellette and wipe the area in an "S"
pattern from top to bottom. (Avoid wipes that contain aloe or that are
scented.)
Fold wipe with dirty side in.
Using the clean side, wipe the area in the same "S" pattern from side to side.
Place wipe in appropriate labeled container. (Contact laboratory for specific containers.)
For window wells and window sills:
Follow same process as above, but area does not have to be 12" by 12"
Measure length and width of the wiped area and record on the sampling form
Be sure to properly label sample containers and complete laboratory
sampling form. Remember to change gloves between samples. Lead dust on
gloves can contaminate samples.
For more information on these procedures or to locate a certified lead-safe renovator, contact your state health department.
Specializing in Asbestos, Lead and Mold Abatement Hibbing, Minnesota, MN
Servicing,
Hibbing, Virginia, Mt. Iron, Buhl, Grand Rapids, Calumet, Ely, Cook,
Cloquet, Chisholm, Duluth, Two Harbors, International Falls AND MORE..
Northern Minnesota Regions , plus.